FireStrobe-1.jpg
REQUEST A QUOTE
Kidde

Notification Appliances

Kidde Notification Appliances are designed to meet the critical needs of the life safety industry for effective emergency communications.

Exceder Notification Appliances

Exceder horns and strobes are compatible with all Kidde Fire Systems Control Panels.The Exceder Series notification appliances offer modern designs with pleasing aesthetics and low cost of ownership. The Exceder Series devices incorporate high reliability and high efficiency optics to minimize current draw allowing for a greater number of appliances on the notification appliance circuit. All strobe models feature an industry first of 8 candela settings on a single appliance. Audible models feature 3 sound settings (90, 95, 99 dB). All switches to change settings can be set without the use of a tool and are located behind the appliance to prevent tampering.Wall models feature voltage test points to take readings with a voltage meter for troubleshooting and AHJ inspection.

Features:

  • Sleek modern aesthetics
  • Finger slide switches
  • Voltage test points
  • Multiple voltages

Series E Speakers and Series E/ET Speaker-Strobes

The Series E Speakers and Series E/ET Speaker-Strobes provide high audio output with clear audibility and are designed to meet the critical needs of the life safety industry for effective emergency voice communications, tone signaling and visible signaling to alert the hearing impaired.Series E Low Profile Speakers and Speaker-Strobes are designed for high efficiency sound output, with dual voltage (25/70 VRMS) capability and field-selectable taps from 1/8 to 2 watts. The Series ET Speaker Strobes are similarly designed with 1/8 to 8 watt field selectable taps. The low profile design incorporates a speaker mounting plate for faster and easier installation. Each model has a built-in level adjustment feature and an aesthetic two (2) screw grille cover. The Series E and Series ET Speaker-Strobe models incorporate the Low Current, Zero Inrush, Series RSS Non-Sync/Sync Strobes

Features:

  • ADA/NFPA/ANSI compliant.
  • Meets OSHA 29 Part 1910.165
  • Strobes produce 1 flash per second over the regulated voltage range.
  • 24 Vdc with wide New UL “Regulated Voltage” using filtered DC or unfiltered VRMS input voltage.
  • Speakers are wall or ceiling mount. Speaker strobes are wall mount.

Series MT Horns and Strobes

Series MT and MT Strobe Multitone electronic signals offer a choice of eight nationally and internationally recognized alerting sounds: Horn, Bell, March Time Horn, Code-3 Tone, Code-3 Horn, Slow Whoop, Siren or Hi/Lo Tone.Our Code-3 horn and tone patterns are engineered to comply with NFPA/ANSI Temporal Pattern specifications without requiring additional equipment. With MT and MT Strobe Signals, one alarm appliance meets most of your signaling needs. The MT Strobes are designed for ADA applications with maximum performance, reliability and cost-effectiveness while meeting or exceeding the latest requirements of NFPA 72 (1999), ANSI 117.1, UFC (2000) and UL Standard 1971 as well as meeting ADA requirements concerning photosensitive epilepsy.

Features:

  • Designed to meet or exceed ADA/NFPA/UFC/ANSI Standards and Accessibility Guidelines. Meets OSHA 29 Part 1910, 165.
  • One alarm appliance with eight (8) selective signals to provide superior sound penetration for various ambient and wall conditions with two field selectable sound output levels.
  • Audible and strobe can operate from a single signaling circuit with any of the eight (8) audible signals.
  • Code-3 Horn and Tone meet ANSI/NFPA temporal pattern for standard emergency evacuation signaling.

Series RSS Strobes and Series RSSP Strobe Plates

Series RSS Strobes and Series RSSP Strobe Plates have been enhanced with lower current draw and zero inrush while maintaining their outstanding performance, reliability, and cost effectiveness.These versatile appliances will satisfy virtually all requirements for indoor, wall or ceiling mount applications. Strobe options include 15/75 cd or the patented Multi-Candela strobe with field selectable candela settings of 15, 30, 75 or 110 cd.

Features:

  • ADA/NFPA/UFC/ANSI compliant
  • Meets OSHA 29 Part 1910.165
  • Convenient wall mounting to standard backboxes
  • Fast installation with IN/OUT screw terminals using #12 to #18 AWG wires.
  • Weatherproof models available
  • “Fire” and “Agent” label options
  • Red and white color options

Model 43-T Vibrating Bell

Superior engineered vibrating bell for fire and life safety alarm systems.Incorporates higher dBA, low current draw and using low frequency aluminum shells for better audibility, it offers durable operation and reliable performance.

Features:

  • Mounting options for surface, semi-flush,outdoor, and concealed conduit installation
  • Red textured finish to improve appearance

Series MB Motor Bells

Fenwal Series MB Motor Bells provide a superior engineered motor bell for fire and life safety alarm systems.The Series MB offers higher dBA, low current draw; builtin trimplate for semi-flush mounting, low frequency aluminum shells for better audibility, low RFI noise and high torque. A permanent magnet motor is incorporated for durable, reliable performance.

Features:

  • 6-inch and 10-inch shell sizes, 24 Vdc models
  • Mounting options for surface, semi-flush,outdoor, and concealed conduit installation
  • Screw terminals permit fast in-out field wiring of 12 to 18 AWG wire
  • Red textured finish to improve appearance and durability

Series NS Horns-Strobes and Series NH Horn Appliances

The Series NS Horn-Strobe Appliances satisfy virtually all requirements for indoor, wall mount applications.The patented 2-wire Series NS Horn-Strobes and Series NH Horns offer more features with less current draw and zero inrush. While the Series NH Horns operate on both 12 and 24 Vdc, the Series NS Horn-Strobes operate with 24 Vdc and may be used with filtered or unfiltered (full-wave-rectified) input voltages. Separate input terminals are available and shunt wires are provided to enable both tone and strobe to operate simultaneously from a single input.

Features:

  • 24 Vdc models with new UL “Regulated Voltage” using filtered DC or unfiltered VRMS input voltage
  • ADA/NFPA/UFC/ANSI compliant
  • Selectable Continuous Horn or Temporal (Code 3)
  • Non-Sync and Sync in one (synchronization requires a SM or DSM Sync Module)
  • Polarized inputs for compatibility with standard reverse polarity type supervision of circuit wiring by an alarm panel
  • Low cost installation via standard electrical boxes.

Series SM and DSM Synch Modules

The Series SM and DSM Sync Modules are utilized with the Series NS/NH, Series RSS, Series RSSP, and selected strobe applications with our other combination appliances. When used with Series NS Horn Strobes, the SM and DSM provide independent operation or synchronized temporal pattern (code 3) Horn and synchronized Strobe Flash, as well as the ability to silence the horn while maintaining the strobe flash while using only a single pair of wires. Sync Modules are available in two versions: the SM12/24 for control for one Class B NAC circuit, and a dual output version, the DSM12/24 for control of either one Class A or two Class B NAC circuits.

Features:

  • Uniquely designed to accept an independent strobe and audible input
  • Compatible with all standard fire alarm panels
  • Meets NFPA-72 (1999) requirement for Temporal Pattern when used with the Series NS Horn-Strobes and Series NH Horns
CTA-BG.jpg

FREE LUNCH & LEARN TRAINING

We bring our experts to you and train your team on any fire protection
topic (and we also bring lunch) at no cost to you!
REGISTER NOW

RECENT POSTS